KNX On/Off actuator with 6 digital inputs and 4 potential-free digital relay outputs, with a breaking capacity of 16A at 230 VAC per output. Each channel can operate independently or simultaneously in various modes, such as binary outputs, shutter control or fan coil, while the actuator also supports ALU arithmetic logic units.
Technical data CT416420
- Supply 29 Vdc from the KNX bus
- 4 dry-contact relay outputs, 16 A at 230 Vac
- 6 SELV inputs for conventional push-buttons or switches, with cable length up to 30 m
- DIN rail, 4 modules
- Connections: KNX terminal, screw terminals for the outputs and micro-connector for the inputs
- Red LED next to the programming button
- Operating temperature -10 to 55 °C, storage -30 to 60 °C
- ETS application “Actuators v2” by Ingenium, minimum ETS version 4.1.8
Functions CT416420
- Inputs as switch (triggering on closing, opening or both) or as push-button with separate actions for short and long press: on/off, send value, dimming, blind or scene
- Outputs as binary, blind (odd output for up, even output for down), thermo-valve with on/off or PWM control, or fan coil with three speed outputs
- Up to 16 scenes per output
- Configurable behaviour after a power failure: no change, open or closed output, or position/speed from 0 to 100% for blinds and fan coil
Product code: CT416420. See also in the KNX Relay Units category: KNX ACTUATOR 6 INPUTS-4 OUTPUTS 16A – MANUAL and KNX ACTUATOR 4 INPUTS – 4 SELV OUTPUTS.
