Device supporting IP routing and tunnelling without the need for an auxiliary power supply (powered directly from the bus). It allows connection between a KNX/IP line and a KNX TP bus line. It includes support for KNX tunnelling, allowing addressing, programming, monitoring and diagnostics of KNX devices via ETS.
The device also incorporates the KNX Secure IP protocol, which ensures secure communication through advanced encryption and authentication. Programming is carried out via ETS.
Technical data BD931000
- Forwards telegrams between different lines through a LAN (IP) network acting as a fast backbone
- As a secure router it couples unprotected KNX TP communication with a secure IP backbone, with KNX Security (AES-128) enabled in ETS
- Operates to the KNXnet/IP specification: core functions, device management, tunneling and routing, with Tunneling V2 and Core V2
- Up to 8 simultaneous KNXnet/IP Tunneling connections
- Advanced filter table for main groups 0 to 31, stores up to 150 telegrams, maximum APDU length 55
- IP address from a DHCP server or set manually in ETS
- Ethernet 100BaseT (100 Mbit/s), RJ-45 port, protocols ARP, ICMP, IGMP, UDP/IP, TCP/IP, DHCP and Auto IP
- Powered by the KNX bus, approx. 20 mA, red/black bus connector
- 2 buttons, 3 multicolour LEDs and a KNX programming button with red LED
- Plastic (PC) DIN rail housing, 1 module (18 mm), weight approx. 40 g
- IP20, operating temperature -5 to +45 °C, storage -25 to +70 °C, humidity 5 to 93% non-condensing
- CE marking under directives 2014/30/EU and 2011/65/EU, standards EN 63044-3, EN 63000, EN 63044-5-1/-5-2/-5-3, EN 61000-6-2, EN 61000-6-3
The device is intended for permanent installation in dry indoor environments, inside electrical panels or small enclosures with DIN rail.
Product code: BD931000. See also in the KNX Other Components category: KNX SECURE LINE COUPLER and KNX CONSUMPTION METER – 3 CHANNELS.
