SimpleHome module with 5 digital inputs (4 standard + 1 scenario) for connecting up to 5 switches in flush-mounted or surface-mounted boxes. Dimensions: 41x29x9 mm. For connection to the SimpleHome BUS. Consumption: < 22 mA.
Technical data 20046501
- 24 Vdc ±5% supply taken directly from the SimpleHome BUS, consumption from 5 mA up to 22 mA.
- Inputs: 4 digital and 1 scenario, optically isolated, set as NC or NO via software.
- Up to 5 contacts can be connected, such as push buttons, switches, two-way switches, intermediate switches or sensors, to control the outputs of other SimpleHome modules.
- Maximum input cable length 25 m, reverse polarity protection.
- Indicator LED: flashes during data transmission on the BUS and stays lit steadily when the power supply negative is missing or the connection is incorrect.
- Terminals: -, + and D for the BUS, I1 to I4 for the inputs, IS for the scenario command and V+ auxiliary +24 Vdc. Removable terminals.
- BUS address set via dip-switch.
- Electromagnetic compatibility standards EN 50081-1 and EN 50082-2, CE marking.
- Storage temperature -10 to +70 °C, relative humidity 5–95% non-condensing.
- Weight 24 g without packaging, dimensions 41 x 29 x 9 mm.
Thanks to its small size it fits in standard 3-module boxes, behind the mechanisms of the wiring device series, or in junction boxes. Programming is done over the BUS line using the SimpleHome/RS232 interface (20022611) and the SimpleProg software.
Product code: 20046501. See also in the Load Management Components category: SIMPLEHOME INTERFACE FOR DALI AND DMX PROTOCOLS and GENERIC BUS MODULE 2IN/2OUT.
