DIMMER ORIGEN 1-10V - 1 CHANNEL

Product code

ING-RBF10A

Guaranteed Safe Checkout

Single product layout Accessories

Description & Features

BUSing dimmer with 1-10 V signal. On/off relay for leading edge dimming. Equipped with 1 channel.

Technical data ING-RBF10A

  • BUSing proportional actuator (regulator) for dimming fluorescent lighting or lighting with electronic ballasts
  • Receives orders only via the bus and can be operated from conventional pushbuttons (through a MECing), hand-held remote controls, touch screens or a PC
  • Digital regulation by a microcontroller with 200 regulation points
  • The regulating ramp (lighting on and off) is set by programming with the Development System software
  • Power supply: 230 Vac and 9-16 Vdc from the bus
  • Maximum power consumption 2.8 VA at 230 Vac, bus current 25 mA at 12 Vdc when not connected to 230 Vac
  • 1-10 V output delivering up to 35 mA, protected against power surges
  • One relay output for switching the ballasts on and off, 10 A cut-off, not protected against short circuits
  • DIN rail mounting, 4 modules
  • Operating temperature from -10 to 55 °C, storage and transport from -30 to 60 °C
  • Standards: EN 50090-2-2, UNE-EN 61000-6-3:2007, UNE-EN 61000-6-1:2007, UNE-EN 61010-1

Installation ING-RBF10A

The number of ballasts that can be connected depends on their start-up peaks, and with a high-consumption load a contactor is added to the outputs. The bus uses flexible shielded cable 2 x 0.5 mm² + 2 x 0.22 mm² with a colour code: red +12 V, yellow A, green B, black reference. Low-voltage lines (bus and inputs) run in a separate duct from the 230 V power lines and the outputs.

Product code: ING-RBF10A. See also in the BUSING Dimmers category: DIMMER RGBW ORIGEN – FLUSH-MOUNTED (CONCEALED) and UNIVERSAL DIMMER ORIGEN – 2 CHANNELS.

More information

Customer Reviews