The addressable module 41IOM122XL, with built-in isolator (ISOLATOR) on the board, controls two balanced inputs and two supervised or relay outputs, depending on the position of the 2 jumpers inside the module. It is powered from the loop and controlled by the control panel through the communication protocol. The module is supplied in a plastic box suitable for surface mounting, with increased dimensions to make wiring of the inputs and outputs easier.
Box dimensions (mm): 178 × 128 × 58
Degree of protection: IP55
Certification: Compliant with EN 54-17 and EN 54-18.
Technical data 41IOM122XL
- Inputs: two, balanced
- Outputs: two, supervised or relay
- Output type selection: with 2 jumpers inside the module
- Isolator: built into the board
- Power: from the loop
- Control: from the control panel via the communication protocol
- Box: plastic, enlarged, for surface mounting
- Dimensions: 178 × 128 × 58 mm
- Degree of protection: IP55
- Standards: EN 54-17 and EN 54-18
The position of the two jumpers sets whether each output works as a supervised output or as a relay output. The large box makes it easier to wire the two inputs and the two outputs.
Product code: 41IOM122XL. See also in the Addressable Fire Detection System category: ADDRESSABLE HEAT DETECTOR and ADDRESSABLE MODULE FOR CONVENTIONAL ZONE, LARGE BOX.
